About Product

Our standard block size is 2M x 1m with thickness of approximately 36cm.

Yes. Our standard block can be compressed. In a 20FT container (approx 60 CBM) we can fit 110 blocks (40-60% compressed from its original size). In a 40Ft container (approx 60 CBM) we can fit approximately 110 blocks (40-60% compressed from its original size).

Usually, even ‘water repellent’ fabrics cannot prevent moisture and humidity penetrating the fabric. After a certain period of time when moisture builds up inside the foam, it will be heavy, wet and cause nasty odour.

Even when using PVC outer shell, humidity and moisture will penetrate through sewing lines. If these seams are sealed the cushion will act like a balloon, the cushion will not breathe or be comfortable. Once the sealing is broken and moisture gets in, the cushion will never dry.

2 years from time of delivery, see explanation here. Statement and conditions apply, ask our specialist for more information.


About Service

We have 4 types: Super Soft, Soft (density 28kg / M3), Medium (density 30kg/M3), Firm (density 32kg/M3)

You can simply email us your cushion dimension sized, CAD drawing, or provide us with a simple template. We will follow up and provide a quotation.

No, we do manufacture furniture. However, we can recommend you several furniture manufacturers that use Urecel QuickDry

No, we specialise on making outdoor foam insert pad. However, we can coordinate and recommend to you our cushion maker alliances that carry a large selection of outdoor fabrics.

This will depend on the thickness of your cushions. The thicker the cushion us we recommend you use soft. In addition the back/ headrest are usually ‘softer’ then the seat. Talk to specialist for further enquiries.

You can download our product brochure in this page.


About Performance

If your cushion does not have drainage (mesh fabric) at the bottom, the pads need to be taken out and dried.

Urecel QuickDry will dry almost immediately, however its not covered with non-woven polyester fiber with lining, depending on the climate and thickness of the cushion. It would not be possible to dry if it was normal foam!

Yes, FR grade is also available, ask our specialist for a copy of our certification.